Oem Parts Manual
Check out this page if you are looking for Oem Parts Manual
 |
 Kawasaki Generator KG5000 A KG 5000 OEM Parts Manual  US $8.88
|
 Kawasaki Generator GE4500 AS GE 4500 OEM Parts Manual US $8.88
|
 Kawasaki Generator GER30A S01 GE 4300 OEM Parts Manual US $8.88
|
 Kawasaki Generator GE 4300 A GE4300 OEM Parts Manual US $8.88
|
 Kawasaki Generator GE 4000 4500 AS OEM Parts Manual US $8.88
|
 Kawasaki Generator KG4000 KG 4000 A OEM Parts Manual US $8.88
|
 Kawasaki Generator GE4000 AS GE 4000 OEM Parts Manual US $8.88
|
 Kawasaki Generator GA3200 A 3200 OEM Parts Manual Fiche US $8.88
|
 Kawasaki Generator GEW90A S01 GE 2900 OEM Parts Manual US $8.88
|
 Kawasaki Generator GE2900 A 2900 OEM Parts Manual US $8.88
|
 Kawasaki Generator KG 2600 B 2900 A B OEM Parts Manual US $8.88
|
 Kawasaki Generator GA 2300 A Series OEM Parts Manual US $8.88
|
 Kawasaki Generator GEW20A S01 2200 A OEM Parts Manual US $8.88
|
 Kawasaki Generator GA 1800 A Series OEM Parts Manual US $8.88
|
 Kawasaki Generator KG 1500 B 1600 A B OEM Parts Manual US $8.88
|
 Kawasaki Generator GA 1400 A Series OEM Parts Manual US $8.88
|
 Kawasaki Generator GAT40 GA1400 A 1400 OEM Parts Manual US $8.88
|
 Kawasaki Generator KG1000 B KG1100 A B OEM Parts Manual US $8.88
|
 Kawasaki Generator 1000 GA1000 A OEM Parts Manual Fiche US $8.88
|
 Kawasaki Generator GAT 1000 GA1000 A OEM Parts Manual US $8.88
|
 Kawasaki Generator KG700 B KG750 A B OEM Parts Manual US $8.88
|
 Kawasaki Generator GD700 A AS OEM Parts Manual GD 700 US $8.88
|
Jeep Cherokee: I'm replacing my clutch. Any suggestions?
To start, I may have access to a hydraulic vehicle lift like at the mechanic's, but I'm not 100% sure. Either way, what tools should I have handy (transmission jack, etc)? I'm going to set aside at least 2 days for the job.
I'm going to order a LUK OEM clutch kit, it seems to be the best choice for Jeeps in general (I scratched the Centerforce clutch idea, not a good idea for Jeeps).
While I'm at it, I'm going to replace master and slave cylinders and all components between. I'm going to overhaul the pedal as well.
I'm planning on simply lightly sanding the flywheel if it is in good shape, otherwise I will have it resurfaced.
Is there anything I should look out for or any other parts I should replace while I'm at it? I have my Haynes manual with me so that will help along the way. Any tips appreciated.
Wish me luck!!
Yeah make sure you don't put your clutch together backwards. Your manual should tell you how to reassemble it correctly. If it doesn't find a certified mechanic to help you. I can't even count how many kids I've seen done that one!
Should watch this vid, this guy seriously knows what he is talking about.
Comments